On-line coupling of packed capillary electrochromatography with coordination ion spray-mass spectrometry for the separation of enantiomers

Pressure-supported packed capillary electrochromatography (CEC) and packed capillary high-performance liquid chromatography (pHPLC) have been coupled on-line to electrospray ionization-mass spectrometry (ESI-MS) and coordination ion spray-mass spectrometry (CIS-MS). Separation of enantiomers of barbiturates and chlorinated alkyl phenoxypropanoates were performed on a permethylated beta-cyclodextrin stationary phase by pressure-supported CEC. For on-line detection with ESI- and CIS-MS, a modified sheath-liquid interface was used. CIS-MS is a universal, novel ionization technique which improves the selectivity as well as the sensitivity. Charged complexes were formed through the addition of central complexing ions such as silver(I), cobalt(II), copper(II), and lithium(I) to the sheath flow. Advantages of CIS-MS detection compared to the ESI-MS mode are discussed. In the CIS-MS mode, increased sensitivity and high selectivity was attained through different possibilities of complexation. The superiority of pressure-supported CEC compared to pHPLC in the hyphenation with CIS-MS is demonstrated.     

Perhalogenmethylmercapto-heterocyclen, (VII) [1] konkurrenzreaktionen elektronenarmer,substituierter aromaten um die halogenmethylmercapto- BZW. Chlorgruppe von Cl3-nFnCSCl in starken saeuren

Electron-deficient aromatics, such as 2,5-bis(trifluoromethylmercapto)thiophene ($\text{1a}$) or (trifluoromethylmercapto)benzene ($\text{8a}$), react with F₃CSCl in the presence of F₃CSO₃ as a catalyst to give mainly 3-chloro-2,5-bis(trifluoromethylmercapto)thiophen ($\text{3a}$) and 1-chloro-4- or 2-(trifluoromethylmercapto)benzene ($\text{10}$, respectively. This reaction competes with the one expected to result in 2,3,5-tris(trifluoromethylmercapto)thiophene ($\text{2a}$) and 1,4- and 1,2-bis(trifluoromethylmercapto)benzene ($\text{9}$,$\text{9′}$), respectively. Further reactions of deactivated aromatics with Cl_3-nF_nCSCl show that the chlorine substitution is in general catalysed by strong acids. Reaction mechanisms are proposed for both Substitutions. The Cl_3-nF_nCS group in aromatics exerts a -M-effect in the case of an attack of a positive ion, e.g. H^⊕, the well-known +M-effect in the case of reactions with positively polarized molecules, e.g. CF₃S^β+Cl^β-.     

The direct determination of Brueckner orbitals with application to the H2 molecule

An iterative procedure is presented which allows for the direct determination of approximate Brueckner orbitals for small atomic and molecular systems. Starting from the Hartree-Fock determinant one first determines pair natural orbitals (PNOs) of independent electron pairs in the HF-field of the remaining electrons. The use of the generalized Brillouin-theorem then leads to an approximate Brueckner orbital for each electron pair. This procedure must be repeated up to self-consistency which is reached generally after 4–5 macroiterations. Applications to the ground state of H₂ show how important the use of Brueckner orbitals is to get good expectation values of one-electron operators and the correct asymptotic behaviour of the potential energy curve for large internuclear distances.

---

Zusammenfassung Es wird eine Iterationsmethode beschrieben, die eine direkte Bestimmung genäherter Bruecknerorbitale für kleine atomare und molekulare Systeme gestattet. Ausgehend von der Hartree-Fock-Determinante bestimmt man zunächst Paar-NOs (PNOs) der unabhängigen Elektronenpaare im HF-Feld der übrigen Elektronen des Systems. Mit Hilfe des verallgemeinerten Brillouin-Theorems erhält man dann ein genähertes Bruecknerorbital für jedes Elektronenpaar. Dies Verfahren muß bis zur Selbstkonsistenz wiederholt werden, die man im allgemeinen nach 4–5 solcher Makroiterationen erreicht. Anwendung auf den Grundzustand des H₂-Moleküls zeigt, wie wichtig die Benutzung von Bruecknerorbitalen ist, wenn man gute Erwartungswerte von Einelektronenoperatoren und das richtige asymptotische Verhalten der Potentialkurve bei großen Abständen erhalten will.

---

Résumé On propose un schéma itératif qui permet le calcul direct des orbitales de Brueckner approchées pour les atomes et les petites molécules. Partant du déterminant Hartree-Fock on calcule d'abord les PNO (pair natural orbitals) des paires indépendantes d'électrons dans le champ effectif des autres électrons dans l'approximation Hartree-Fock. Ensuite le théorème de Brillouin généralisé permet de calculer les orbitales de Brueckner approchées pour chaque paire d'electrons. On recommence le calcul des PNO, la self-consistance de cette méthode itérative s'établit en général au bout de 4 ou 5 macroitérations. Les applications à la molécule H₂ démontrent que l'utilisation d'orbitales de Brueckner s'impose si l'on s'intéresse à des bonnes valeurs moyennes d'opérateurs monoélectroniques ou au comportement asymptotique correct des courbes de potentiel aux grandes distances.

---

---

Dedicated to the memory of Prof. K. H. Hansen.     

Analysis of functional groups on the surface of plasma-treated carbon nanofibers

Plasma chemically modified carbon nanofibers were characterized by X-ray photoelectron spectroscopy with regard to the content of carbon, oxygen, and nitrogen and the contribution of carboxylic groups or ester, carbonyl and hydroxylic groups or ether on the surface. Unfortunately, X-ray photoelectron spectroscopy only provides an average value of the first 10 to 15 molecular layers. For comparison, depth profiles were measured and wet chemical methods were applied to estimate the thickness of the functionalized layer and the distribution of oxygen-containing functional groups within the near-surface layers. The results indicate that the fiber surface is covered by a monomolecular oxygen-containing layer and that plasma treatment allows a complete oxygen functionalization of the uppermost surface layer. The best conditions for plasma treatment found within the set of parameters applied to generate complete functionalization are: plasma gas O(2)/Ar ratio 1:1, gas pressure 1-1.5 hPa, plasma power 80 W, treatment time >or= 5 min. Additionally, three quick and easy methods are presented to estimate the efficiency of plasma treatment with regard to surface functionalization: pyrolysis, contact angle measurements, and light permeability measurements of aqueous carbon nanofiber suspensions.     

Highly porous uranyl selenate nanotubules

A first amine-templated uranyl selenate based upon highly porous uranyl selenate nanotubules, (C4H12N)14[(UO2)10(SeO4)17(H2O)], has been prepared in the room-temperature reaction of uranyl nitrate, butylamine, and H2SeO4 in aqueous solution. The structure consists of nanometer-scale tubular [(UO2)10(SeO4)17(H2O)]14- units packed in a hexagonal-type fashion. The tubules have elliptical cross section with outer dimensions of 25 x 23 A = 2.5 x 2.3 nm. The internal free crystallographic diameter of the tubules is 12.6 A = 1.26 nm, which is comparable to the effective pore size in large-pore zeolites. This finding demonstrates the possibility of nanostructures for actinides in higher oxidation states and opens up a new area of research and exploration.     

High temperature corrosion behaviour of M(Co,Ni)CrAIY-coatings on high temperature materials-microanalytical investigations

In our former investigations, the phenomenon high temperature corrosion (HTC) was described exemplarily on selected materialcoating combinations for blades of stationary gas turbines, mainly in the temperature region of up to 750° C. To answer the question, in which manner higher gas inlet and/or higher material surface temperature would influence the HTC behaviour, a special analytical technique—the integral layer profile analysis—was introduced to ameliorate concentration profile methods. By examining IN 738 LC specimens with CoCrAlY plasma spray coating, stressed by hot gas at 900° C, the limits of this system are shown by explaining the corrosion mechanism; the method is also used for other systems, e.g. U 520 with NiCrAlY coating at 750° C.     

Ultraviolet Bremsstrahlung spectroscopy

Recent experimental progress has introduced Bremsstrahlung spectroscopy especially in the isochromat mode as a new surface analytical tool. Bremsstrahlung production may be regarded as radiative capture by solids and is therefore the inverse process to the well known photoemission. In contrast to photoemission which probes occupied electronic states at solid surfaces, Bremsstrahlung spectroscopy opens up the possibility to investigate unoccupied electronic states including the important region between Fermi- and vacuum energy. Measurements on polycrystalline materials will be discussed on the basis of an isotropic three step model for Bremsstrahlung emission. More recent experiments on single crystals with electrons of well defined energy and initial momentum $\text{k}\text{}$ have demostrated that $\text{k}\text{}$-resolved spectroscopy provides energy versus momentum dispersion relations for unoccupied bands. Application of spin polarized electron beams has advanced $\text{k}\text{}$-resolved Bremsstrahlung spectroscopy to a state of maturity comparable to spin polarized angle resolved photoemission. This paper attempts to review the development and summarize the present state of ultraviolet Bremsstrahlung isochromat spectroscopy.     

Characterization of thermo-oxidative stability of polymer optical fibers using chemiluminescence technique

The thermo-oxidative stability of commercially available polymer optical fibers (POFs) and their components (cores and claddings) was investigated. All the bare POFs (core and cladding only) studied here were based on poly(methyl methacrylate) (PMMA) core. The fibers were exposed to 100 °C/low humidity for about 4200 h. Chemiluminescence (CL) technique was applied to investigate the thermo-oxidative stability and for measuring the transmission loss during exposure a prototype device called multiplexer was used. POFs exhibited variation in thermo-oxidative stability although they possessed identical core material PMMA. This was due to difference in the chemical compositions of claddings. Claddings were more susceptible to the thermo-oxidative degradation compared to cores. The thermo-oxidative degradation of both the cladding and the core was found in POFs as a result of climatic exposure. POFs showed an early drop-off followed by a slow decline of transmission. The early drop-off of transmission was attributed to physical changes like thermal expansion and the slow decline of transmission to chemical changes like oxidative degradation of POFs. A good linear relationship between optical transmission stability and thermo-oxidative stability of POFs was established from these studies.     

The Dynamic Behaviour and NMR Solution structures of complexes of the type (Bisphosphine)(cycloocta-1,5-diene)iridium(I) and the X-ray crystal structure of (cycloocta-1,5-diene)((−)-norphos)iridium(I) hexafluorophosphate

A square-planar coordination geometry was found for the complex [Ir(cod){(?)-norphos}][PF₆] ( 1b [PF₆]; cod = cylcoocta-1,5-diene and (?)-norphos = [(2R,3R)-8-9-10-trinorborn-5-ene-2,3-diyl]bis(diphenylphosphine)) in the solid state by X-ray diffraction. Crystal data: monoclinic, space group P2₁, a = 10.751 (6), b = 18.669(14), c = 12.037(8) Å, β = 114.82(5)°, Z = 2. A total structural assignment including the configurational and conformational aspects of this and the related compounds [Ir(bishosphine)(cod)]X (bisphosphine = (?)-chiraphos = (2S,3S)-2,3-bis(diphenylphosphino)butane and (?)-norphos, X = Cl, CF₃SO₃, or PF₆) was carried out in solution by one- and two-dimensional NMR spectroscopy. The complexes containing the CF₃SO₃^? and PF₆^? anions are four-coordinate cations with square-planar geometry, whereas the chlorides are five-coordinate neutral compounds showing solvent-dependent dynamic behaviour. In toluene, two diastereoisomers of [IrCl(cod){(?)-norphos}] ( 2b ) exist and interconvert slowly at room temperature. This interchange is fast in CDCl₃ solution, and it is likely to involve Cl dissociation and the formation of the cation [Ir(cod){(?)-norphos}]⁺ as an intermediate.     

Preferred dimerization of tetra-tolyl- and tetra-tosylurea derivatives of flexible and rigidified calix[4]arenes

The dimerization of tetratolyl- and tetratosyl-urea derivatives 1 and 2, derived from a tetrapentoxy calix[4]arene in the cone conformation and of the corresponding tetra-urea derivatives 3 and 4, in which the cone conformation is rigidified by the two crown-3 tethers, have been studied. All six possible equimolar mixtures were examined by 1H NMR using CDCl3 and CD2Cl2 as solvents. While no heterodimers are found for the combinations 1/3 and 2/4 in either solvent, all remaining combinations lead to the (exclusive) formation of heterodimers in CD2Cl2. In CDCl3 heterodimers are only observed for the combinations of 3 with 2 or 4. These results are discussed in terms of entropic and enthalpic contributions and compared with MD-simulations in a box of chloroform solvent molecules.